How quickly can pallet flow rack be delivered and installed in Addison?

Our Westmont warehouse is about 15 minutes from Addison, so standard components often arrive within 48 hours of an approved order. Engineered pallet flow rack parts can take longer, and we put the real lead time in writing with your quote. Most Addison installations run one to four weeks depending on size.

Does pallet flow rack work in Addison buildings near Lake Street (Route 20) corridor?

Usually, yes. In Addison, hundreds of small and mid-size manufacturers in buildings that were often expanded in sections, so column lines and heights shift across one floor. We plan the pallet flow rack around your column grid, clear height, and dock layout so pallet positions land where the building allows, and we show you the position count before you order.

Which Addison operations get the most out of pallet flow rack?

We see it pay off most for precision manufacturing and tool & die operations in Addison, especially where high-turn SKUs that need a constant pick face is the daily headache. During a free warehouse consultation we compare pallet flow rack with other options for your SKUs so you can see whether it is the right fit.

How deep should our flow lanes run?

Five to twenty pallets is typical. Depth should match how much of one SKU moves through in a cycle - a lane that never fills is wasting a pick face. We size depth from your actual movement data, not a rule of thumb.

Our pallet pool is rough. Will that jam the lanes?

Broken bottom boards and heavy overhang cause most hang-ups in flow lanes. If your pallets vary, full-width rollers are the safer specification, and we say so up front rather than after installation.

How is pallet flow laid out in a freezer building?

Cold changes the layout, not just the hardware. Freezer buildings here concentrate storage to shrink the refrigerated envelope, so lanes often run deeper than they would in ambient space. Components are specified for the temperature so bearings and brakes behave in the cold.

How much aisle space do our forklifts need at each end?

The load aisle and pick aisle each need enough room for the trucks using them, including the pallet's length and turning space. We check your forklift dimensions and loaded reach before fixing lane depth. In older Bedford Park buildings, a shallower lane may leave the working room your drivers need without sacrificing access to the pick face.

Pallet Flow Rack system inside a Illinois warehouse

Addison, Illinois

Pallet Flow Rack in Addison, IL

Name: Chicago Pallet Racks - Addison
Address: 36 N. Cass Ave., Westmont, IL, 60559, US
Telephone: (312) 815-2445
Price range: $$

A small manufacturer off Lake Street whose building was added onto twice, so column lines and heights change across one floor is one of the most common problems we see in Addison right now. Look closer and the real issue tends to be high-turn SKUs that need a constant pick face.

Pallet flow rack loads from one aisle and picks from another on gravity rollers, so the oldest pallet is always the next one out and nobody hand-rotates stock. We size the pallet flow rack to your loads, your forklifts, and the clear height you already lease, then send a CAD layout with pallet positions counted and an itemized quote. Call (312) 815-2445 and tell us what you store in Addison.

(312) 815-2445

Why Addison Warehouses Work With Us

We have worked Addison buildings from the Lake Street (Route 20) corridor to the Fullerton Avenue industrial area for years, and they are rarely alike. Around here, hundreds of small and mid-size manufacturers in buildings that were often expanded in sections, so column lines and heights shift across one floor. A pallet flow rack layout copied from another building almost always wastes pallet positions.

Our team has quoted and installed racking for precision manufacturing and tool & die work in Addison for decades. With pallet flow rack, the deciding factor is normally lane pitch calculated for the pallet weights you actually run, and we put the numbers for that in front of you up front.

Our Westmont warehouse is about 15 minutes from Addison by way of I-355, I-290, and Lake Street, so deliveries are short, parts are close, and our own crews do the installation. One contact handles the layout, quote, schedule, and service afterward.

Free warehouse consultation

CAD layout with position counts

Installation by our own crews

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Operations We Rack Around Here

Nearby areas we work in regularly include the Lake Street (Route 20) corridor, the Fullerton Avenue industrial area, the Army Trail Road parks, the Route 53 and I-355 area.

Precision manufacturing

Tool & die

Plastics

Wholesale distribution

How Pallet Flow Rack Works

Load one side, pick the other, and let gravity enforce first in, first out.

Load end

Pallets enter at the high end of the lane. Each new pallet stages behind the one before it, so put-away is a single move made from the load-side aisle.

Gravity conveyor

Full-width rollers or skate-wheel tracks, set on a pitch calculated for the pallet weight, carry loads forward under control rather than free rolling.

Braking and separation

Brake rollers and pallet separators regulate travel and stop pallets from bunching, protecting both the product and the structure underneath it.

Pick end

Pickers work a face of first-in pallets. Pull one and the next indexes forward automatically, so the pick aisle stays organized without anyone re-facing stock.

What a Pallet Flow Rack Project Includes

A Addison pallet flow rack project starts with a phone call or a few photos, not a sales pitch. We go through load size and weight, forklift type and lift height, usable clear height in the storage area, column spacing, and how fast product turns. That free warehouse needs analysis usually takes about fifteen minutes.

You get a pallet flow rack drawing for your building with every position counted, every level rated, and an itemized price by frame, beam, and accessory. Because this system turns on gravity lanes loaded on one side and picked on the other, we usually include an alternative layout on the same plan so you can compare storage against access.

Common pallet flow rack parts move from our Westmont stock within days. Our crews install to the approved drawing, anchor every frame, and work around your shifts so tool & die production does not stop. Your layout stays on file, so adding a bay next year or replacing a damaged upright starts from where the system already is.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Call (312) 815-2445

Recent Installations

Racking projects completed for warehouses across Chicago and the surrounding suburbs.

Carton flow rack installation in a warehouse

Drive-in pallet rack installation in a high-bay warehouse

Pallet rack installation reaching the ceiling of a distribution center

Selective pallet rack aisle with wire decking

Warehouse pallet racking aisles with a forklift

Rows of pallet racking in a distribution facility

Warehouse pallet rack system spanning a large storage area

Pallet racking rows under warehouse skylights

Cantilever rack arms mounted along a warehouse wall

Push back pallet rack carts on inclined rails

View More Projects

Get a Pallet Flow Rack Quote for Your Addison Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (312) 815-2445.

Chicago Pallet Racks

36 N. Cass Ave.

Unit #5170

Westmont, IL 60559

(312) 815-2445

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Chicago Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.