How quickly can pallet flow rack be delivered and installed in Bolingbrook?

Our Westmont warehouse is about 20 minutes from Bolingbrook, so standard components often arrive within 48 hours of an approved order. Engineered pallet flow rack parts can take longer, and we put the real lead time in writing with your quote. Most Bolingbrook installations run one to four weeks depending on size.

Does pallet flow rack work in Bolingbrook buildings near I-55 Boughton Road interchange?

Usually, yes. In Bolingbrook, modern cross-dock and big-box distribution buildings off I-55 built for high throughput and tall rack. We plan the pallet flow rack around your column grid, clear height, and dock layout so pallet positions land where the building allows, and we show you the position count before you order.

Which Bolingbrook operations get the most out of pallet flow rack?

We see it pay off most for retail distribution and third-party logistics operations in Bolingbrook, especially where high-turn SKUs that need a constant pick face is the daily headache. During a free warehouse consultation we compare pallet flow rack with other options for your SKUs so you can see whether it is the right fit.

How deep should our flow lanes run?

Five to twenty pallets is typical. Depth should match how much of one SKU moves through in a cycle - a lane that never fills is wasting a pick face. We size depth from your actual movement data, not a rule of thumb.

Our pallet pool is rough. Will that jam the lanes?

Broken bottom boards and heavy overhang cause most hang-ups in flow lanes. If your pallets vary, full-width rollers are the safer specification, and we say so up front rather than after installation.

How is pallet flow laid out in a freezer building?

Cold changes the layout, not just the hardware. Freezer buildings here concentrate storage to shrink the refrigerated envelope, so lanes often run deeper than they would in ambient space. Components are specified for the temperature so bearings and brakes behave in the cold.

How much aisle space do our forklifts need at each end?

The load aisle and pick aisle each need enough room for the trucks using them, including the pallet's length and turning space. We check your forklift dimensions and loaded reach before fixing lane depth. In older Bedford Park buildings, a shallower lane may leave the working room your drivers need without sacrificing access to the pick face.

Pallet Flow Rack system inside a Illinois warehouse

Bolingbrook, Illinois

Pallet Flow Rack for Bolingbrook, Illinois Warehouses

Name: Chicago Pallet Racks - Bolingbrook
Address: 36 N. Cass Ave., Westmont, IL, 60559, US
Telephone: (312) 815-2445
Price range: $$

A lot of the calls we get from Bolingbrook start the same way: a high-volume distribution building off I-55 where receiving outruns put-away every peak season. Underneath that is usually high-turn SKUs that need a constant pick face, and it gets worse every month the layout stays the same.

Pallet flow rack loads from one aisle and picks from another on gravity rollers, so the oldest pallet is always the next one out and nobody hand-rotates stock. We work out the storage math for your Bolingbrook footprint first, then hand you a CAD layout and itemized quote before a single beam ships. Call (312) 815-2445 to get started.

(312) 815-2445

Why Bolingbrook Warehouses Work With Us

Bolingbrook is a market where modern cross-dock and big-box distribution buildings off I-55 built for high throughput and tall rack. Whether your building sits near the Remington Boulevard distribution parks or closer to the Bolingbrook Promenade, the column grid and usable height decide the pallet flow rack design, not a catalog drawing.

Our team has quoted and installed racking for retail distribution and third-party logistics work in Bolingbrook for decades. With pallet flow rack, the deciding factor is normally five to twenty pallets deep behind a single pick face, and we put the numbers for that in front of you up front.

Steel moves from our Westmont warehouse to Bolingbrook in about 20 minutes over I-55, I-355, and Route 53. Our own installation crews build the system, and the same person who drew your layout answers the phone when a beam gets hit two years later.

Free warehouse consultation

CAD layout with position counts

Installation by our own crews

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Operations We Rack Around Here

Nearby areas we work in regularly include the I-55 Boughton Road interchange, the Internationale Centre business park, the Remington Boulevard distribution parks, the Route 53 industrial area.

Retail distribution

Third-party logistics

Consumer products

Food & beverage

How Pallet Flow Rack Works

Load one side, pick the other, and let gravity enforce first in, first out.

Load end

Pallets enter at the high end of the lane. Each new pallet stages behind the one before it, so put-away is a single move made from the load-side aisle.

Gravity conveyor

Full-width rollers or skate-wheel tracks, set on a pitch calculated for the pallet weight, carry loads forward under control rather than free rolling.

Braking and separation

Brake rollers and pallet separators regulate travel and stop pallets from bunching, protecting both the product and the structure underneath it.

Pick end

Pickers work a face of first-in pallets. Pull one and the next indexes forward automatically, so the pick aisle stays organized without anyone re-facing stock.

What a Pallet Flow Rack Project Includes

A Bolingbrook pallet flow rack project starts with a phone call or a few photos, not a sales pitch. We go through load size and weight, forklift type and lift height, usable clear height in the storage area, column spacing, and how fast product turns. That free warehouse needs analysis usually takes about fifteen minutes.

The deliverable is a CAD layout and a priced bill of material: positions, elevations, aisle widths, and capacities. Since FIFO rotation your team can document, not just intend drives the design, we often model the same Bolingbrook footprint two ways so you can weigh density against picking speed with real figures.

Once you approve the layout, steel is scheduled and delivered in drops that fit your dock. Our installation crews build the pallet flow rack exactly as drawn, confirm it performs loaded, and tag every bay. The job is phased so your Bolingbrook operation keeps running, and later additions go through the same team.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Call (312) 815-2445

Recent Installations

Racking projects completed for warehouses across Chicago and the surrounding suburbs.

Carton flow rack installation in a warehouse

Drive-in pallet rack installation in a high-bay warehouse

Pallet rack installation reaching the ceiling of a distribution center

Selective pallet rack aisle with wire decking

Warehouse pallet racking aisles with a forklift

Rows of pallet racking in a distribution facility

Warehouse pallet rack system spanning a large storage area

Pallet racking rows under warehouse skylights

Cantilever rack arms mounted along a warehouse wall

Push back pallet rack carts on inclined rails

View More Projects

Get a Pallet Flow Rack Quote for Your Bolingbrook Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (312) 815-2445.

Chicago Pallet Racks

36 N. Cass Ave.

Unit #5170

Westmont, IL 60559

(312) 815-2445

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Chicago Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.