How quickly can cantilever rack be delivered and installed in Bedford Park?

Our Westmont warehouse is about 20 minutes from Bedford Park, so standard components often arrive within 48 hours of an approved order. Engineered cantilever rack parts can take longer, and we put the real lead time in writing with your quote. Most Bedford Park installations run one to four weeks depending on size.

Does cantilever rack work in Bedford Park buildings near Clearing Yard rail district?

Usually, yes. In Bedford Park, rail-served industrial buildings built for heavy loads, often with rail docks, and long narrow floor plates. We plan the cantilever rack around your column grid, clear height, and dock layout so load positions land where the building allows, and we show you the position count before you order.

Which Bedford Park operations get the most out of cantilever rack?

We see it pay off most for rail-served distribution and food ingredients operations in Bedford Park, especially where bundle lengths that do not fit a standard pallet rack bay is the daily headache. During a free warehouse consultation we compare cantilever rack with other options for your SKUs so you can see whether it is the right fit.

How much weight can each arm carry?

Arm capacity is specified per arm and per column, based on your heaviest bundle and how far the load projects. Give us bundle dimensions and weights and we size arms, columns, and bracing to that with margin - then hand over the ratings for the finished run.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Will our forklift or side loader work with a cantilever layout?

Aisle width and arm clearance are matched to whatever is moving material - standard forks, a side loader, or an overhead crane. Tell us the equipment and its turning or reach dimensions and the layout gets built around it.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

Cantilever Rack system inside a Illinois warehouse

Bedford Park, Illinois

Cantilever Pallet Rack Systems in Bedford Park, IL

Name: Chicago Pallet Racks - Bedford Park
Address: 36 N. Cass Ave., Westmont, IL, 60559, US
Telephone: (312) 815-2445
Price range: $$

A lot of the calls we get from Bedford Park start the same way: a rail-served building near the Clearing Yard taking heavy loads off railcars faster than the rack layout can store them. Underneath that is usually bundle lengths that do not fit a standard pallet rack bay, and it gets worse every month the layout stays the same.

Cantilever rack holds lumber, pipe, tubing, and sheet goods on arms with no front column in the way, so long loads come off the floor and onto rated levels. We work out the storage math for your Bedford Park footprint first, then hand you a CAD layout and itemized quote before a single beam ships. Call (312) 815-2445 to get started.

(312) 815-2445

Why Bedford Park Warehouses Work With Us

Bedford Park is a market where rail-served industrial buildings built for heavy loads, often with rail docks, and long narrow floor plates. Whether your building sits near the Archer Avenue strip or closer to Midway Airport, the column grid and usable height decide the cantilever rack design, not a catalog drawing.

As a division of Warehouse Equipment & Supplies Co., we have designed storage for rail-served distribution and food ingredients operators across Chicagoland since 1997. For cantilever rack, the fit question is usually long material off the floor and back into usable positions, and we answer it during a free warehouse consultation before you commit.

Steel moves from our Westmont warehouse to Bedford Park in about 20 minutes over I-55, I-294, and Harlem Avenue. Our own installation crews build the system, and the same person who drew your layout answers the phone when a beam gets hit two years later.

Free warehouse consultation

CAD layout with position counts

Installation by our own crews

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the Clearing Yard rail district, the 65th Street industrial corridor, the Archer Avenue strip, the Midway Airport area.

Rail-served distribution

Food ingredients

Chemical & industrial supply

Manufacturing

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on anchored bases. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

A Bedford Park cantilever rack project starts with a phone call or a few photos, not a sales pitch. We go through load size and weight, forklift type and lift height, usable clear height in the storage area, column spacing, and how fast product turns. That free warehouse needs analysis usually takes about fifteen minutes.

The deliverable is a CAD layout and a priced bill of material: positions, elevations, aisle widths, and capacities. Since single-sided runs along the wall, double-sided in open floor drives the design, we often model the same Bedford Park footprint two ways so you can weigh density against picking speed with real figures.

Once you approve the layout, steel is scheduled and delivered in drops that fit your dock. Our installation crews build the cantilever rack exactly as drawn, confirm it performs loaded, and tag every bay. The job is phased so your Bedford Park operation keeps running, and later additions go through the same team.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (312) 815-2445

Recent Installations

Racking projects completed for warehouses across Chicago and the surrounding suburbs.

Carton flow rack installation in a warehouse

Drive-in pallet rack installation in a high-bay warehouse

Pallet rack installation reaching the ceiling of a distribution center

Selective pallet rack aisle with wire decking

Warehouse pallet racking aisles with a forklift

Rows of pallet racking in a distribution facility

Warehouse pallet rack system spanning a large storage area

Pallet racking rows under warehouse skylights

Cantilever rack arms mounted along a warehouse wall

Push back pallet rack carts on inclined rails

View More Projects

Get a Cantilever Rack Quote for Your Bedford Park Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (312) 815-2445.

Chicago Pallet Racks

36 N. Cass Ave.

Unit #5170

Westmont, IL 60559

(312) 815-2445

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Chicago Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.